| Iggesund Invercote |
Workington Incada |
Strömsbruk Plastic coatings Foil and film laminates |
Sheeting stations/ Service centres |
|
| Sheets | ||||
| Width (Cross direction (CD) or Slit dimension) |
0/+2 mm
|
0/+2 mm
|
0/+2 mm
|
0/+2 mm
|
| Max slit wander | 0.25 mm/sheet | 0.25 mm/sheet | 0.25 mm/sheet | 0.25 mm/sheet |
| Length (Machine direction (MD) or Chop dimension) |
0/+2 mm
|
0/+2 mm
|
0/+2 mm
|
0/+2 mm
|
| Squareness | 1 mm per metre | 1 mm per metre | 1 mm per metre | 1 mm per metre |
| Number of sheets/pallet* | ±0.5 % | ±0.5 % | ±5 % | ±0.5 % |
| Number of sheets/ream (ream wrapped, typically 100 sheets) |
±3 sheets
|
±3 sheets
|
±3 sheets
|
±3 sheets
|
| Max sheet size** |
1350 x 1600 mm |
1400 x 1600 mm |
1350 x 1600 mm** |
1400 x 1610 mm |
| Board laminates: | ||||
| 1630 x 1800 mm | ||||
| Min sheet size** |
290 x 420 mm |
405 x 450 mm |
||
| Embossed board: | Board laminates: | |||
| 290 x 450 mm | 400 x 550 mm | |||
|
Max pallet height |
Standard board: |
|||
| 1580 mm (pallet included) | 1500 mm (pallet incl) | 1580 mm (pallet incl)** | 1500 mm (pallet incl) | |
| Embossed board: | Board laminates: | |||
| 1250 mm (pallet included) | 1140 mm (pallet included) | |||
| Iggesund Invercote |
Workington Incada |
Strömsbruk Plastic coatings Foil and film laminates |
Sheeting stations/ Service centres |
|||||
| Reels | ≥ 120 mm: | < 120 mm: | ≥ 230 mm: | < 230 mm: | ≥ 120 mm: | < 120 mm: | ≥ 230 mm: | < 230 mm: |
| Width | ±1 mm | 0/–1 mm (0/+1 mm and ±0.5 mm by request) |
0/+2 mm | 0/–0.5 mm | ±1 mm | 0/–1 mm | ±1 mm | 0/–1 mm |
| Length* | ±0.5%* | ±5 metres | ±0.5%* | ±5 metres | ±0.5%* | ±5 metres | ±0.5%* | ±5 metres |
| Core displacement | < 5 mm | < 2 mm | < 3 mm | < 2 mm | < 5 mm | < 2 mm | < 5 mm | < 2 mm |
| Diameter, general | Max 1800 mm ± 25 mm | Max 1800 mm ± 25 mm | Max 1860 mm | Max 1200 mm ± 25 mm | ||||
| If max diameter specified | +0/–50 mm | +0/–50 mm | +0/–50 mm | +0/–50 mm | ||||
* According to information given on pallet or reel label.
** Not valid for laminated products, see specification sheets.
Tolerances on deliveries
Quantity based on weight
The delivered quantity is expressed in and based on weight, which is determined at the time the product is manufactured and packed. For deliveries in sheets the weight is determined net – i e weight of pallet and wrapping is excluded from the weight. For deliveries in reels the weight is determined gross – i e wrapping, core and plugs are included in the weight.
| Product | Permitted deviation from weight ordered | |
| Invercote | All deliveries | ±4% |
| Incada | up to 50 tonnes | ±4% |
| over 50 tonnes | ±2.5% | |
| Plastic coated/ laminated products |
up tp 5 tonnes | ±15% |
| over 5 tonnes up to 15 tonnes | ±10% | |
| over 15 tonnes | ±5% |
Quantity based on area
Invercote
We can offer Invercote in quantities based on number of sheets or metres in length:
| Products | Permitted deviation from number of sheets/metres ordered |
| Invercote Sheets | ±0.5% |
| Invercote Reels | ±0.5% |
Incada
Incada products are available in quantities based on number of sheets or metres in length, where the actual area supplied is invoiced in tonnes calculated from the nominal grammage.
