Choices of raw material

Types of fibre

Basically the choice is between long fibres (spruce/pine) and short fibres (e.g. birch). The board maker carefully selects and blends different fibres to achieve the appearance and functional properties desired for specific products.

Types of pulp

There are three different pulping processes, which all produce different kinds of pulp: mechanical, chemical, and recycled fibre.


This process gives a very high yield of fibre from the tim­ber. The presence of lignin in the pulp makes the fibres hard and rigid. This produces a paperboard with high stiffness, limited strength, low density and lower resil­­­i­ence. Mechanically separated virgin fibre pulp containing lignin reacts more strongly to changes in external environment, humidity and temperature, a reaction that can have a negative effect on flatness and dimensional stability.

As a result, paperboard made solely from mechanical pulp is relatively weak. The paperboard retains the yellowish colour of the wood used and is pure because it is made solely of natural and known raw materials.


This process preserves the length of the virgin fibre. The pure cellulose extracted has a high degree of consolidation. Both of these features produce a very strong paperboard sheet.

The fibre is flexible and soft, giving good creasing, embossing, and die-cutting properties and low dust generation.

Bleached cellulose pulp has high whiteness, brightness and light stability. Paperboard made of virgin fibre pulp has the highest possible purity and provides packaged products with the best odour and taste neutrality.


Mechanical pulp.

Chemical pulp.


This separation and recycling process utilises a wide variety of waste paper and board. Each time a fibre is recycled it is contaminated and shortened and its capacity for con­­­solidation is reduced. This means that virgin fibre must be added to maintain the quality of recycled pulp. Recycled pulp is carefully cleaned and screened during stock preparation. Mixed waste paper is not usually de-inked for paperboard manufacture and hence the pulp may retain traces of inks, adhesives and other residues which together give this kind of paperboard a grey colouration.

The resulting product has less predictable composition and poorer functional properties than virgin fibre-based boards.

In addition to the types of fibres and pulp, the construction and coating of the paperboard sheet also affect the paperboard’s final properties. Selecting and combining types of fibres, the pulp preparation process, sheet construction and coating give the paperboard the final properties it needs to meet a wide variety of market demands.

Solid bleached board (SBB)

SBB cross section. Click to enlarge.

SBB is made exclusively from bleached chemical pulp. It usually has a coated top surface and some grades are also coated on the reverse side. The term SBS (Solid Bleached Sulphate), derived from the method of pulp production, is sometimes used to describe this product.

This is a medium density paperboard with excellent surface printing properties to meet graphical and packaging needs. It gives a wide scope for structural design and can be cut, creased and embossed with ease. It is a pure and hygienic primary fibre paperboard and is suitable for the packaging of aroma and flavour sensitive products.

Folding box board (FBB)

FBB cross section. Click to enlarge. 

FBB comprises middle layers of mechanical pulp sandwiched between outer layers of chemical pulp. The top layer of chemical pulp is bleached and pigment coated. The back of the paperboard is cream (manila) in colour. This is because the back layer of bleached or unbleached chemical pulp is translucent, allowing the colour of the middle layers to influence the appearance. The back layer may, however, be thicker or have pigment coating – this product is known as White Back Folding Box Board. The combination of inner layers of mechanical pulp with outer layers of chemical pulp creates a strong and stiff sheet, taking advantage of the well-known I-beam principle in physics. The mechanical pulp can be of CTMP (Chemi-thermomechanical pulp), RMP (Refiner mechanical pulp) or TMP (Thermomechanical pulp) origin. This is a low density material with high stiffness. Fully coated grades give excellent printing and visual impact. This is a primary fibre paperboard with consistent purity for product safety.

Solid unbleached board (SUB)

SUB cross section. Click to enlarge. 

SUB is made exclusively from unbleached chemical pulp. The base board is brown. To achieve a white surface it might be coated, sometimes in combination with a layer of bleached, white fibres under the coating.

The paperboard is used where there is a high strength requirement, e.g. carrier sleeves, liquid packaging, etc.


White lined chipboard (WLC)

SUB cross section. Click to enlarge. 

WLC comprises middle plies of recycled pulp. The top layer or liner of bleached chemical pulp is frequently pigment coated. The second layer or underliner may also comprise bleached chemical pulp or mechanical pulp.

The reverse side layer can be made from specially selected recycled pulp or may be white through the use of bleached chemical pulp. There are additional grades of unlined chipboards with coloured (dyed) liner plies.

This is a medium density product which is widely used in general packaging. It is difficult to generalise about WLC because of the wide range of qualities available.

According to DIN 19303

Coated SBB


Solid Bleached Board

Cast Coated SBB
Folding Box Board
Coated FBB, white back
Solid Unbleached Board
Coated FBB, cream back
White Lined Chipboard
Coated SUB, white or brown back
  G Gestrichen, coated
Coated WLC, cream or white back
  U Ungestrichen, uncoated
Coated WLC, grey back (spec.volume >1.45 cm³/g)
  A Gussgestrichen, cast coated
Coated WLC, grey back (spec.volume 1.3 to 1.45 cm³/g)
  Z Chemisch gebleichte Frischfasern, bleached virgin         chemical pulp
Coated WLC, grey back (spec.volume <1.3 cm³/g)
  C Holzstoff, virgin mechnical pulp
Uncoated SBB   N Chemisch ungebleichte Frischfasern, unbleached virgin chemical pulp
Uncoated FBB, white back
Uncoated FBB, cream back
Uncoated WLC, cream or white back
Uncoated WLC, grey back      


Iggesund Paperboard
825 80 Iggesund

+46 650 - 280 00

Connect with Iggesund

  • Cookies
  • MyPages
  • Print

© Iggesund 2016