Aluprint

Aluprint

Aluprint

 

Click to enlarge

Product description

Paperboard with 8 μm aluminium foil, NC lacquered, provides excellent conditions for decorative printings where a luxurious appeal is required. The printing surface of Aluprint requires no preprint treatment and is available in a bright and a matt version. Use either of the following methods: offset litho, both conventional and UV, gravure and flexo. Common for all methods is that inks for non-absorbent materials should be used. For correct ink recommendations, contact your local supplier.

Additional properties

  • NC lacquered surface ready to print on
  • Exceptionally good surface smoothness
  • Excellent barrier properties

 


Vapor             Oxygen          UV-light          Aroma
 

Typical end use areas

Generally in applications where a luxury appeal is desired:
  • Tobacco
  • Perfume and cosmetics
  • Hair care and toiletries
  • Confectionery

Baseboard/Grammage guide

Information on baseboard properties is found under Paperboard products in the Product Catalogue. Aluprint is available in the following combinations of baseboards and grammages (g/m2):

 Invercote

Printing side 36 g/m2 Aluprint
------------------------------------------------
Grammage range according to the specific baseboard
------------------------------------------------
Reverse side

   
 Invercote

Printing side
------------------------------------------------
Grammage range according to the specific baseboard
------------------------------------------------
Reverse side 36 g/m2 Aluprint

   
 Incada

Printing side 36 g/m2 Aluprint
------------------------------------------------
Grammage range according to the specific baseboard
------------------------------------------------
Reverse side

   
 Incada

Printing side
------------------------------------------------
Grammage range according to the specific baseboard
------------------------------------------------
Reverse side 36 g/m2 Aluprint

   
  For Aluprint the estimated increase in stiffness as a result of the lamination process is, for machine direction 15-50%, for cross direction 40-65%, in relation to the specified baseboard value. The lower the baseboard grammage, the higher the percentage increase.


PropertyPrinting sideReverse sideToleranceTest method
Grammage (g/m2) 36 - ± 10% ISO 536
Added thickness (µm) 21 - - Calculated value
Surface roughness (µm) ≤ 1 - - ISO 8791
Surface tension (dynes/cm) ≥461) - - ISO 8296
Adhesion (scale) 5 (typical) - ≥ 3 Internal
1) When produced. After delivery the level can be affected by conditions beyond our control.

Contact

Iggesund Paperboard
825 80 Iggesund
Sweden

+46 650 - 280 00
info@iggesund.com

Connect with Iggesund

  • Holmen.com
  • Cookies
  • MyPages
  • Print

© Iggesund 2016